Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Poly V-belt drive for vehicles with air conditioner compressor and tensioning roller - exploded view >
< Removing and installing poly V-belt - vehicles with air conditioner compressor and tensioner
A1
Power unit
4-cylinder TDI engine (1.6 ltr. 4-valve common rail), mechanics
Enginecrankshaft group, pistons / Cylinder block (pulley end)
Removing and installing tensioner for poly V-belt
Removing and installing tensioner for poly V-belt
Removing and installing tensioner for poly V-belt
Removing
–
Detach poly V-belt from tensioner
→ Chapter
.
–
Release hose clips
-1-
and
-2-
and remove air hose.
–
Remove bolts
-arrows-
.
–
Move coolant hose
-3-
clear.
–
Loosen hose clip
-2-
.
–
Unplug electrical connector
-1-
at charge pressure sender -G31-/intake air temperature sender -G42- and detach air pipe (right-side).
–
Remove bolt
-2-
and take off poly-V-belt tensioner
-1-
.
Installing
Installation is carried out in the reverse order; note the following:
l
Tightening torque
→ Chapter „Poly V-belt drive for vehicles with air conditioner compressor and tensioner - exploded view“
Note
Renew the bolts tightened with specified tightening angle.
–
Install air pipe
→ Chapter
.
–
Install air hoses with screw-type clips
→ Fig.
.
–
Install poly V-belt
→ Chapter
.
Power unit
4-cylinder TDI engine (1.6 ltr. 4-valve common rail), mechanics
Enginecrankshaft group, pistons / Cylinder block (pulley end)
Removing and installing tensioner for poly V-belt
Poly V-belt drive for vehicles with air conditioner compressor and tensioning roller - exploded view >
< Removing and installing poly V-belt - vehicles with air conditioner compressor and tensioner