Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing bracket for ancillaries >
< Removing and installing poly V-belt - vehicles with air conditioner compressor and tensioning roller
A1
Power unit
4-cylinder TDI engine (1.6 ltr. 4-valve common rail), mechanics
Enginecrankshaft group, pistons / Cylinder block (pulley end)
Removing and installing vibration damper
Removing and installing vibration damper
Removing and installing vibration damper
Removing
Vehicles without air conditioner compressor:
–
Remove poly V-belt
→ Chapter
.
Vehicles with air conditioner compressor:
–
Vehicles with air conditioner compressor and tensioning roller: Remove front right wheel housing liner
→ Rep. gr.66
.
–
Remove poly V-belt:
t
→ Chapter „Removing and installing poly V-belt - vehicles with air conditioner compressor and tensioner“
.
t
→ Chapter „Removing and installing poly V-belt - vehicles with air conditioner compressor and tensioning roller“
.
All vehicles (continued):
–
Counterhold by applying ring spanner to bolt for crankshaft sprocket and slacken bolts for vibration damper.
–
Remove bolts and take off vibration damper.
Installing
Installation is carried out in the reverse order; note the following:
l
Tightening torque
→ Chapter „Poly V-belt drive for vehicles with air conditioner compressor and tensioner - exploded view“
Note
Renew the bolts tightened with specified tightening angle.
l
Installation position: hole
-arrow-
in vibration damper must be positioned over raised section of crankshaft sprocket.
–
Install poly V-belt:
t
→ Chapter „Removing and installing poly V-belt - vehicles without air conditioner compressor“
.
t
→ Chapter „Removing and installing poly V-belt - vehicles with air conditioner compressor and tensioner“
.
t
→ Chapter „Removing and installing poly V-belt - vehicles with air conditioner compressor and tensioning roller“
.
–
Install front right wheel housing liner
→ Rep. gr.66
.
Power unit
4-cylinder TDI engine (1.6 ltr. 4-valve common rail), mechanics
Enginecrankshaft group, pistons / Cylinder block (pulley end)
Removing and installing vibration damper
Removing and installing bracket for ancillaries >
< Removing and installing poly V-belt - vehicles with air conditioner compressor and tensioning roller