audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing door contact switch (rear) F10/F11 > < Removing and installing window regulator switches E52/E54

A1

Removing and installing door opener illumination bulb L110/L111
Removing and installing door opener illumination bulb -L110-/-L111-
   
Removing
–  Remove door trim (rear) → Rep. gr.70.
–  Unplug electrical connector -1-.
–  Turn bulb holder -2- anti-clockwise and pull out at door opener.
Installing
Installation is carried out in the reverse order; note the following:
–  Install door trim (rear) → Rep. gr.70.
  A96-10826

Removing and installing door contact switch (rear) F10/F11 > < Removing and installing window regulator switches E52/E54