audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing door opener illumination bulb L110/L111 > < Overview of lights and switches in rear doors

A1

Removing and installing window regulator switches E52/E54
Removing and installing window regulator switches -E52-/-E54-
   
Removing
–  Remove door trim (rear) → Rep. gr.70.
–  Carefully pull retaining tab -2- to one side -arrow-.
–  Press window regulator switch -1- out of switch mounting.
–  Unplug electrical connector -3-.
Installing
Installation is carried out in the reverse order; note the following:
–  Install door trim (rear) → Rep. gr.70.
  A96-11044

Removing and installing door opener illumination bulb L110/L111 > < Overview of lights and switches in rear doors