audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing headlight range control motor V48/V49 > < Renewing side light bulb M1/M3 or daytime running light bulb L174/L175

A1

Renewing front turn signal bulb M5/M7
Renewing front turn signal bulb -M5-/-M7-
   
Removing
–  Remove headlight housing → Chapter.
–  Detach housing cover -1- for turn signal from headlight housing -arrow A-.
–  Carefully press retaining tab -3- aside and pull bulb holder -2- out of housing -arrow B-.
–  Screw bulb out of bulb holder.
  A94-10967
Installing
Installation is carried out in the reverse order; note the following:
–  Fit new bulb in housing; do not touch glass part of bulb with bare hands.
–  Slide bulb holder into housing; ensure mounting -3- and guide -4- face each other.
–  Close housing cover -1- and make sure tab -2- of recess -arrow- in headlight housing align.
–  Install headlight housing → Chapter.
  A94-10968

Removing and installing headlight range control motor V48/V49 > < Renewing side light bulb M1/M3 or daytime running light bulb L174/L175