–
| Move steering wheel down and to rear as far as possible, making use of full range of steering column adjuster. |
–
| Remove trim panels for steering column switch module → Rep. gr.68. |
–
| Release retaining tabs -arrows- and lift mounting -3- out of trim (bottom) -2- for steering column switch module. |
–
| Take reader coil -1- out of mounting. |
Installation is carried out in the reverse order; note the following: |
–
| Press reader coil into mounting until it engages audibly. |
–
| Install trim panels for steering column switch module → Rep. gr.68. |
|
|
|