audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing grommet > < Adjusting wiper arm

A1

Removing and installing rear window wiper motorV12
Removing and installing rear window wiper motor -V12-
   
Removing
–  Remove wiper arm → Chapter.
–  Remove rear lid trim (bottom) → Rep. gr.70.
–  Unplug electrical connector -2-.
–  Pull retaining clip -arrow A- and disconnect washer fluid hose -3- from connecting pipe for washer jet.
–  Unscrew nuts -arrows B- and detach rear window wiper motor -V12--item 1-.
Installing
l  Tightening torque → Chapter
Installation is carried out in the reverse order; note the following:
l  Fluid hose must audibly engage in washer jet connection.
–  Install rear lid trim (bottom) → Rep. gr.70.
–  Adjust wiper arm → Chapter.
  A92-10129

Removing and installing grommet > < Adjusting wiper arm