A2
Removing and installing windscreen - exploded view |
1 - | Windscreen |
q | Removing → Chapter. |
q | Installing → Chapter. |
2 - | Adhesive bead |
q | Note minimum drying times → Chapter. |
q | Note differing distances from edge of windscreen: |
q | Dimension -a- = 30 mm ± 2 mm. |
q | Dimension -b- = 6 mm ± 2 mm. |
3 - | Adjusting wedge |
q | Remains in vehicle after installing. |
q | Insert adjusting wedge after installing windscreen and fitting trim cover at top so that it makes contact with roof frame. |
4 - | Cutting thread |
q | Place cutting thread beneath trim cover all around. |
5 - | Plenum chamber cover |
q | After installing windscreen, carefully push plenum chamber cover into fastening strip on bottom edge of windscreen. |
q | When installing a new windscreen you must first remove protective strip from fastening strip → Fig.. |