A2
| Removing storage compartment (driver side) |
| 1 - | Storage compartment (driver side) |
| q | Remove trim for A-pillar (bottom) → Chapter. |
| q | Remove bolts -2- (2x). |
| q | Unfasten driver's storage compartment at top at clips -3- (3x). |
| q | Set down driver's storage compartment. |
| q | Squeeze retaining hooks -5- (3x) and unclip diagnostic connector -4-. |
Note| t | Never stand driver's storage compartment -1- on its end. |
| t | For carrying driver's storage compartment -1-, grasp hold between storage compartment and footwell trim. |
| 2 - | Bolts (2x) |
| q | Tightening torque: 4 Nm |
| 3 - | Clips |
| 4 - | Diagnostic connector |
| 5 - | Retaining hook |