Audi Workshop Service and Repair Manuals

Lubricate all bearings with grease, Part No. G 000 602 prior to assembly.

• Bulkhead
• Mounting bracket for pedal cluster
• Hexagon nut, 25 Nm
• Bush for brake pedal
• Self-locking hexagon nut, 20 Nm
• ◆ 2 off
• Self-locking hexagon nut, 28 Nm

• Brake light switch
• ◆ Before installing brake light switch, clip brake pedal to brake servo push rod
• ◆ Before installing pull plunger out completely
• ◆ Press brake pedal down as far as possible by hand.
• ◆ Guide switch through mounting hole and install by turning 90° anti-clockwise
• ◆ Release brake pedal
• ◆ Plug in connector for brake pedal
• ◆ Adjusting, removing and installing brake light switch
• ◆ Check function of brake lights
• Hexagon nut, 30 Nm

• Connector plate
• Cap
• Brake pedal
• ◆ Detach brake pedal from brake servo
• ◆ Removing and installing
• Bush
• ◆ For supporting the casing tube
• Bush for brake pedal
• Hexagon bolt

• Clutch pedal
• Hexagon bolts / hexagon nuts, 20 Nm
• ◆ 3 off, for attaching pedal cluster for clutch
• Mounting bracket for clutch pedal
• Brake servo
• ◆ Detach brake pedal from brake servo
• ◆ Removing and installing