| Detaching and attaching compressor from/onto bracket |
Note | t
| The compressor can be detached/re-attached from/onto the bracket without opening the refrigerant circuit. |
| t
| Do not drain the refrigerant circuit, do not detach the refrigerant hoses and pipes from the compressor. |
| t
| After removal, secure the compressor with a wire, for example, to the side member. Never leave it hanging from the refrigerant pipes. |
| t
| Before removing, mark the running direction of the poly-V-belt with chalk or a felt-tipped pen. If the belt runs in the opposite direction when it is refitted, this can cause breakage. |
|
|
|
