Audi Workshop Service and Repair Manuals > A2 > Heating, ventilation, air conditioning system | Heating, air conditioning system | Air conditioner | Servicing the refrigerant circuit | Detaching and attaching compressor from/onto bracket | Detaching and re-attaching compressor from/onto bracket

Detaching and re-attaching compressor from/onto bracket

–	Remove the noise insulation → General Body Repairs, Exterior; Rep. Gr.50.

–	Slacken the poly-V-belt → Engine Mechanical Components; Repair group 13

–	Unscrew the bolts -A- (25 Nm).

Note

t	Do not detach the refrigerant pipes and clamp -E-.

t	Fit a washer -D- where there is no bracket -C- attached.

t	Once nut -B- has been loosened (torque 20 Nm), tighten the bolts -A- first, and then tighten the clamp -E- using the nut -B-.

t	Before fastening the compressor, check the position of both bushes -F- in the bracket or in the compressor.

Audi Workshop Service and Repair Manuals