audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing the fresh-air/recirculated-air flap positioning motor V154 > < Removing and installing the fresh-air blower series resistor with overheating cut-out N24

A2

Removing and installing the fresh-air blowerV2
Removing and installing the fresh-air blower -V2-
–  Remove the glove box: → General Body Repairs, Interior; Repair group 68
   
–  Unplug the connector -A-.
–  Unfasten the cable ties -B-.
–  Remove the bolts -C-.
–  Pull the fresh-air blower -D- out of the heater.
  Note
  A80-0164
t  To permit access to all the bolts -C-, an aperture is provided in the dash panel cross member -A-.
t  Installation is in reverse order.
t  During installation, take care to ensure that the fresh-air blower -V2- is correctly seated in the heater / air conditioner.
t  Remember that there are different fresh-air blower -V2- versions for vehicles with heating and air conditioning. → Parts List
  A80-0168

Removing and installing the fresh-air/recirculated-air flap positioning motor V154 > < Removing and installing the fresh-air blower series resistor with overheating cut-out N24