–
| Plug in the connector -E- on the operating and display unit for air conditioner/Climatronic -E87-. |
–
| Guide the supply lead -A- to the connector -E- through the 50A current probe -VAS 5051/9- |
–
| Set the vehicle diagnostic, testing and information system -VAS 5051- to “multimeter measuring: 50A current probe” mode. |
Note All the operating and display unit for air conditioner/Climatronic -E87- connectors must be plugged in. |
–
| Switch on heated rear window on the operating and display unit for air conditioner/Climatronic -E87- (the warning lamp in the button lights up). |
t
| Specification: the display on the vehicle diagnostic, testing and information system -VAS 5051- changes from approx. 0 A to less than 25 A |
–
| Wait for approx. 12 minutes |
t
| Specification: the display on the vehicle diagnostic, testing and information system -VAS 5051- changes from less than 25 A to approx. 0 A (the warning lamp in the button goes out) |
Note t
| Stray current may cause a low current reading on the current probe with the heated rear window switched off. |
t
| If the ambient temperature is below 0 °C, the rear window heating remains activated until the ignition is switched off (can be deactivated manually at any time). If the temperature during a driving cycle rises above 0 °C, the heated rear window is deactivated on completion of operating period stored in the operating and display unit for air conditioner/Climatronic -E87- (currently approx. 12 minutes). |
t
| At ambient temperatures greater than 0 °C, the heated rear window is switched off automatically by the operating and display unit for air conditioner/Climatronic -E87- on completion of the operating period stored in the operating and display unit for air conditioner/Climatronic -E87- (currently approx. 12 minutes). |
|
|
|