Checking hydraulic bucket tappets |
Special tools and workshop equipment required |
Note t
| Hydraulic bucket tappets cannot be serviced. |
t
| Irregular valve noises when starting engine are normal. |
–
| Start engine and allow to run until radiator fan switches on. |
–
| Increase engine speed to about 2500 rpm for approx. 2 minutes; perform test drive if necessary. |
Note If the irregular valve noise stops but repeatedly re-occurs when driving short distances, then the oil retention valve is defective. Fitting location: in oil filter bracket → Item. The oil retention valve cannot be renewed separately. |
If the hydraulic tappets are still noisy, locate defective tappet as follows: |
–
| Turn crankshaft until cam of the bucket tappet to be checked faces upwards; to do so, push vehicle forwards with 4th gear engaged and ignition switched off. |
|
|
|