A2
| Thermostat and rear coolant pipe - exploded view |
| 1 - | Connection |
| 2 - | Bolt |
| q | Thread-forming |
| q | 9 Nm |
| 3 - | O-rings |
| q | Renew |
| 4 - | Thermostat |
| q | Removing and installing → Chapter |
| 5 - | To heat exchanger for heater |
| 6 - | From coolant expansion tank |
| 7 - | Thermostat housing |
| q | Removing and installing → Chapter |
| 8 - | From heat exchanger for heater |
| 9 - | Coolant pipe (rear) |
| q | Removing and installing → Chapter |
| 10 - | Seal |
| q | Renew |
| 11 - | Cylinder block |
| 12 - | Retaining clip |
| q | Check for firm attachment |
| 13 - | Bolt |
| q | 10 Nm |
| 14 - | Sealing plug |
| 15 - | Coolant temperature sender -G62- |
| q | Removing and installing → Chapter |
| 16 - | Retaining clips |
| q | Check for firm attachment |
| 17 - | Bolt |
| q | Thread-forming |
| q | 6 Nm |
| 18 - | Bracket |
| 19 - | To top of radiator |
| 20 - | From bottom of radiator |
