audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing anti-roll bar

A2

Removing
Removing
–  Remove wheels.
–  Remove noise insulation.
   
–  Unscrew bolt -1- from wishbone -2- on both sides.
  A40-0404
–  Unbolt steering box from subframe -arrows- and tie up with wire (or similar).
–  Place gearbox jack -V.A.G 1383 A- under subframe.
–  Locate subframe → Chapter.
–  Carefully lower subframe.
  A40-0425
–  Detach clamps for anti-roll bar from suspension bracket -arrows-.
–  Remove anti-roll bar from one side.
  A40-0405

Installing > < Removing and installing anti-roll bar