| –
| Press bottom of wheel firmly inwards and outwards. |
Note! | t
| There should be no perceptible or visible “play” when carrying out both tests. |
| t
| Observe the swivel joint while performing the tests. |
| t
| Take into account any existing wheel bearing play or “play” in upper suspension strut mounting. |
| t
| Check rubber boot for damage. |
| Forged steel wishbone with integral swivel joint |
| –
| Renew complete wishbone if swivel joint is defective. |
| Fabricated wishbone with bolt-on swivel joint |
| –
| Renew only swivel joint if joint is defective. |
|
|
|
