audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Requirements for test > < Motor/pump unit: exploded view

A2

Checking delivery pressure of motor/pump unit
   
Checking delivery pressure of motor/pump unit
Special tools and workshop equipment required
t  Drip tray -V.A.G 1306-
t  Torque wrench -V.A.G 1331-
t  Tool insert (17 mm) -V.A.G 1331/6-
t  Torque wrench -V.A.G 1332-
t  Power steering tester -V.A.G 1402-
t  Adapter -V.A.G 1402/1A-

   
t  Adapter -V.A.G 1402/2-
t  Adapter -V.A.G 1402/3-
t  Hose from adapter set -V.A.G 1402/6-
t  Adapter set for tamper-proof wheel bolts -T40004-
t  Extractor bottle (commercially available)

  Note!
t  Small quantities of hydraulic fluid will remain in the motor/pump unit as well as in the return line and expansion hose after extraction.
t  Do not re-use hydraulic fluid which has been drained off.
t  Renew seals.
t  The expansion hose and return line must not be clamped with hose clamps, e.g. -3094- or other tools. Clamping can cause damage to the expansion hose and return line.
t  To avoid damage, a bending radius of less than 100 mm is not permissible when bending or suspending the expansion hose and return line.
   

Requirements for test > < Motor/pump unit: exploded view