audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing power steering sensor G250

A2

Removing
Removing
–  Disconnect battery → Electrical system; Rep. Gr.27.
–  Remove front left wheel.
–  Remove noise insulation → General body repairs, exterior; Rep. Gr.50.
–  Remove front left wheel housing liner → General body repairs, exterior; Rep. Gr.66.
   
–  Remove socket head bolts -4- from rotary slide valve housing on steering box.
–  Pull power steering sensor -G250--3- out of steering box.
1 - Expansion hose
2 - Return line
5 - Subframe
  A48-0349
–  Remove power steering sensor wiring -3- from spacer bracket -1- and spacer -2-.
–  Unclip wire from retaining clip on motor/pump unit bracket.
–  Detach electrical connector -4- from motor/pump unit.
–  Take out power steering sensor -G250-.
  A48-0356

Installing > < Removing and installing power steering sensor G250