audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Adjusting spray jets - vehicles as of Model Year 2003 > < Removing and installing spray jets - vehicles as of Model Year 2003

A2

Adjusting spray jets - vehicles up to Model Year 2002
Adjusting spray jets - vehicles up to Model Year 2002
   
Adjustment
–  Use water-soluble ink to mark the top edge of the spray area on the windscreen:
l  Dimension -a- = 420 ± 50 mm
  Note
The setting dimension is measured from the spray jet.
  A92-0052
–  Adjust the height of the spray area at the front at the spray jet -arrow-.
–  If the spray area is not as specified, the spray jet is dirty and must be cleaned.
Cleaning spray jet:
–  Remove the spray jet → Chapter.
–  Flush out the spray jet with clean water opposite to the spray direction.
–  To remove any residual contamination, compressed air can be blown through the spray jet, but only opposite to the spray direction.
If the spray area is still not as specified.
–  Replace the spray jet.
  A92-0172

Adjusting spray jets - vehicles as of Model Year 2003 > < Removing and installing spray jets - vehicles as of Model Year 2003