Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing 9-socket relay carrier >
< Relay carriers, fuse carriers - overview
A2
Vehicle electrics
Electrical system
Wiring
Relay carriers, fuse carriers
Removing and installing fuse carrier on 9-socket relay carrier
Removing and installing fuse carrier on 9-socket relay carrier
Removing and installing fuse carrier on 9-socket relay carrier
Removing
Caution
On vehicles with telematics system, activate service mode of telematics control unit before disconnecting battery
→ Radio, telephone, navigation, self-diagnosis; Rep. Gr.01
.
–
With the ignition switched off, disconnect the earth wire at the battery
→ Chapter
.
–
Press the light switch
-arrow 1-
and at the same time turn it to the right
-arrow 2-
.
–
Hold the switch in this position and pull it out of the switch housing
-arrow 3-
.
–
Unplug the connectors.
–
Remove the driver's storage compartment
→ Rep. Gr.68
.
–
Remove nuts
-arrows-
from fuse carrier.
–
Remove fuse carrier
-1-
from 9-socket relay carrier.
Note
Exact assignment for fuse carrier can be found on applicable current flow diagram
→ Current flow diagrams, Electrical fault finding and Fitting locations
.
Installing
Install in reverse order, paying attention to the following:
–
Fit the driver's storage compartment
→ Rep. Gr.68
.
–
Install the light switch
→ Chapter
.
–
Connect the battery. Action to be taken
→ Anchor
.
Tightening torque
Component
Nm
Fuse carrier to 9-socket relay carrier
2
Vehicle electrics
Electrical system
Wiring
Relay carriers, fuse carriers
Removing and installing fuse carrier on 9-socket relay carrier
Removing and installing 9-socket relay carrier >
< Relay carriers, fuse carriers - overview