A3 L4-2.0L Turbo (BPY) (2006)
Trim Panel: Service and Repair
D-Pillar Trim, Removing and Installing
D-pillar Trim, Removing And Installing
Removing
CAUTION: Observe safety precautions for work on airbags.
-
Remove rear seat bench.
-
Remove 1/3 rear seat backrest.
-
Remove 2/3 rear seat backrest.
-
Remove lower C-pillar trim: vehicles without side airbag, vehicles with side airbag.
-
Remove rear cross panel trim.
-
Remove side trim.
-
Remove screws - arrows -.
-
Remove rear automatic belt retractor.
-
Remove bolt - 1 -.
-
Disengage C-pillar trim from D-pillar trim - arrow -
-
Remove bolt - 1 -.
-
Remove D-pillar trim from body at front edge - A arrows -.
-
Slide D-pillar trim upward at rear edge - arrow B -.
-
Remove D-pillar downward.