A3 L4-2.0L Turbo (BPY) (2006)
-
Pull hydraulic thrust piece out of steering gear housing.
Note:
^
If there are signs of corrosion, damage or wear on rack, steering gear must be replaced completely.
Installing and adjusting
-
Coat new thrust piece - arrow - (contact surface of rack), seal and hole in steering gear housing - arrow - with supplied grease G 052 192 A1.
Do not use any other type of grease.
-
Install hydraulic thrust piece and seal - arrow -.
-
Tighten adjustment screw to 40 Nm.