A3 L4-2.0L Turbo (BPY) (2006)
Steering Gear: Procedures
Sensor Wiring, Replacing
Sensor wiring, replacing
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1331
Removing
-
Remove steering gear.
-
Clean steering gear in area of cover.
-
Clamp steering gear, as shown in illustration.
1. Bracket VW 540/2
2. Thrust piece 3253/6 (2x)
-
Unclip sensor wire at steering gear housing.
-
Remove seal - 1 - from cover - 2 -.
-
Remove cover - 2 -.
-
Carefully remove seal from steering gear housing.
Make sure that no sealant residue enters sensor or housing.