A3 L4-2.0L Turbo (BPY) (2006)
/Page-4483004.png)
-
Tighten new adjustment screw to 40 Nm.
-
Peen the adjustment screw 6 times - arrows - using a punch.
Punch points must be applied 2 graduation lines next to the drill out punch points.
-
Mark one adjustment screw graduation line with the steering gear housing.
-
Loosen the adjusting screw 5.5 graduation lines to the left.
-
Install the adjusting screw 2.5 graduation lines to the right.