audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Pedal Assembly and Clutch Master Cylinder Assembly Overview|Page 9158 > < Pedal Assembly and Clutch Master Cylinder Assembly Overview|Page 9156
Page 1
background image

Clutch Pedal Assembly: Removal and Replacement
Mounting Bracket

Mounting Bracket

Special tools, testers and auxiliary items required

‹› Hose Clamps Up to 25 mm Diameter. (3094)

‹› Hose Clamp Pliers (VAS 6340)

Removing

CAUTION!
Observe procedures for disconnecting battery.

-

Move driver seat toward the rear.

-

With ignition switched off, disconnect Battery Ground (GND) cable -  arrow -.

-

Remove battery. 

Vehicles with an air filter housing in front of the battery 

-

Remove the entire air filter housing. See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing

Continued for all vehicles

Pedal Assembly and Clutch Master Cylinder Assembly Overview|Page 9158 > < Pedal Assembly and Clutch Master Cylinder Assembly Overview|Page 9156