A3 L4-2.0L Turbo (BPY) (2006)
/Page-3192002.png)
-
Remove the battery carrier - arrows -.
‹› While performing the following work, make sure that no brake fluid comes into contact with longitudinal member or with transmission. If this
happens, these areas must be cleaned thoroughly.
-
Clamp off the clutch master cylinder supply hose with a Hose Clamps Up to 25 mm Diameter. (3094).
-
Loosen the spring clamp - 3 - using Hose Clamp Pliers (VAS 6340) and remove the clutch master cylinder supply hose.