A3 L4-2.0L Turbo (BPY) (2006)
Check spring connections and rivet connections
-
Check spring connections - arrows A - for damage and rivet connections - arrows B -for secure fit.
^
A pressure plate with severely kinked or broken off spring connections or with loose rivet connections must be replaced.
Note:
^
Only replace the pressure plate and clutch plate together. Allocate pressure plate and clutch plate according to engine code via.
Removal instructions for dual-mass flywheel
Note:
^
To prevent damaging the dual-mass flywheel when removing, the bolts - B - must not be removed using an air or impact driver. Removal of the
bolts is only permissible by hand.
-
Turn dual-mass flywheel - A - so that the bolts are positioned centrally to the bores -arrows -.
-
When removing bolts, make sure that no bolt head contacts dual-mass flywheel, otherwise it may be damaged when the bolt is turned further.