A3 L4-2.0L Turbo (BPY) (2006)
![background image](/audi/a3/l4-2.0l_turbo_(bpy)/Page-3296002.png)
-
Secure the drive axles with bundling wire, making sure not to damage the protective surface coating.
-
Remove bolt for flange shaft - arrow -, by screwing two bolts into the flange and counter-holding flange shaft using a pry bar.
-
Place appropriate receptacle underneath transmission.
-
Pull out flange shaft with spring.
-
Pull out sealing ring for flange shaft using Extractor Lever (T20143/2).
Installing