A3 L4-2.0L Turbo (BPY) (2006)
‹› For shift cable to shift lever
‹› Release to adjust selector mechanism => [ Release the cable retainer for the selector and shift cables as follows: ] See: Shifter
M/T/Adjustments
5
Shift cable
‹› Removing and installing, refer to => [ Shift Cable and Selector Cable ] See: Shift Cable and Selector Cable
‹› Adjusting, refer to => [ Shift Mechanism, Adjusting ] See: Shifter M/T/Adjustments
‹› Beginning with MY 2008, the mounting on the shift lever inside the shift mechanism was changed
6
Lock washers
‹› Discontinued from MY 2008
7
Circlips
8
Selector cable
‹› Removing and installing, refer to => [ Shift Cable and Selector Cable ] See: Shift Cable and Selector Cable
‹› Adjusting, refer to => [ Shift Mechanism, Adjusting ] See: Shifter M/T/Adjustments
‹› Beginning with MY 2008, the mounting on the shift bracket inside the shift mechanism was changed
9
Bolt
‹› 20 Nm
10
Grommet
11
Bushing
12
Cable mounting bracket
‹› Can be made of plastic or metal
Allocation of Cable Retainers