A3 L4-2.0L Turbo (BPY) (2006)
-
Push sleeve forward up to the stop - arrow 1 -.
-
Turn sleeve to the right up to the stop - arrow 2 - so that it engages.
-
Remove the cable retainers from the cables.
-
Pull off the circlips - 1 - and - 2 -.
-
Remove the cable mounting bracket from the cables.
Installing
Install in reverse sequence; note the following points:
-
Secure the shift cable and selector cable to the selector mechanism housing with the circlips - 1 to 4 -.