audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing operating rods for front door lock > < Removing and installing front door lock with operating elements from VIN 8L XA 000 001

A3 Mk1

General Body Assembly Exterior (Repair groups 50, 55, 57, 58, 60, 63, 64, 66)
Front door
Removing and installing cover for door lock
 
A57-0183
  • Lock cylinder securing rod
    • ◆ Clip in bushing on release lever.
  • Door handle
    • ◆ Removing and installing
  • Door lock operating rod
    • ◆ Installation as for securing rod -4-.
    • ◆ Clipping-in length -a- 13 ±3 mm.
  • Door lock cover
    • ◆ To remove, first unclip at top, then remove from door lock to rear at bottom.
 
A57-0183
  • Installation pin
    • ◆ Only fitted in new parts - serves as locating aid.
    • ◆ Only remove door lock once operating rod has been installed.
  • Operating clip
    • ◆ Inserting in door lock => Page 57-25.

Removing and installing operating rods for front door lock > < Removing and installing front door lock with operating elements from VIN 8L XA 000 001