Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing front door lock with operating elements up to VIN 8L XA 000 000 >
< Removing and installing window lifter and window
A3 Mk1
Body
General Body Assembly Exterior (Repair groups 50, 55, 57, 58, 60, 63, 64, 66)
Front door, central locking / Front door
Removing and installing impact bar
General Body Assembly Exterior (Repair groups 50, 55, 57, 58, 60, 63, 64, 66)
Front door
Removing and installing impact bar
Window slot strip
◆
Door sub-frame removed.
◆
To remove:
‒
Unscrew pin from expanding clip -2-.
‒
Lever out pin -arrow- in area of pillar -B- and remove window slot strip.
‒
Only press in pin on installation.
Expanding clip
Front door
Bellows
Hexagon bolt
◆
8 Nm
Impact bar
◆
Door sub-frame removed.
‒
Unscrew hexagon nuts -5- and remove side impact bar.
Fig1→ Fitting side padding.
‒
Bonding surfaces for side padding must be clean and free from grease.
‒
Pull protective film off side padding, insert in side impact protection -2- and press firmly into front door as shown.
‒
Dimension -a- = 67mm ±5mm.
Body
General Body Assembly Exterior (Repair groups 50, 55, 57, 58, 60, 63, 64, 66)
Front door, central locking / Front door
Removing and installing impact bar
Removing and installing front door lock with operating elements up to VIN 8L XA 000 000 >
< Removing and installing window lifter and window