audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing guide plate > < Adjusting zero position (motor)
General Body Assembly Exterior (Repair groups 50, 55, 57, 58, 60, 63, 64, 66)
Servicing sun roof up to approx. 10.97 (Rockwell)
Checking and adjusting zero setting (guide plate)

Note:

Zero setting can only be made with sun roof motor removed.

  • ‒ Sun roof motor removed.
  • ‒ Trims removed.
  • ‒ Push front guide, rear guide and locating hook guide forwards until lug engages in sun roof frame.
 
A60-0011
  • ‒ → Push rear guides from front to back.
  • ‒ Guide lugs on either side must be between marks on guide plates -arrow-; shift rear guide, if necessary.
  • ‒ The guide lugs on both sides should be between the marks on the guide plates -arrow-; alter position of rear guide if necessary.

Removing and installing guide plate > < Adjusting zero position (motor)