Audi Workshop Service and Repair Manuals

• ◆ Removing
• ‒ Before removing, run seat to top position.
• ‒ Remove seat

Note:

For greater clarity, the seat is shown from below.

• ‒ Remove outer side panel of seat => Page 72-49
• ‒ Detach spring -2- (inboard side) from retaining hook -3-.
• ‒ Disengage spring -4- (outboard side) from retaining hook -5-.

• ‒ Unscrew bolts -2- (3x).
• ‒ Remove seat height adjuster unit -1-.

• Seat height adjuster unit
• Bolts (3x)

• ◆ Installing
• ‒ Install seat height adjuster unit.
• ‒ Springs -2- and -4- may have become disengaged from retaining hooks -6- and -7-.

• ‒ Engage springs -2- and -4-.

• Seat pan
• Spring
• Retaining hooks
• Spring
• Retaining hooks
• Retaining hooks
• Retaining hooks