audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing over-centre spring - RHD vehicles > < Removing and installing clutch pedal switch F36 (round housing)

A3 Mk1

Removing and installing over-centre spring - LHD vehicles
Removing and installing over-centre spring - LHD vehicles
Special tools and workshop equipment required
   
t  Assembly clip -3317-
  W00-0007
Removing
–  Remove storage compartment on driver's side → Rep. Gr.68.
–  Press down clutch pedal to compress over-centre spring and fit assembly clip -3317- from the top onto over-centre spring.
l  The drilling -arrow- faces towards clutch pedal.
–  Return clutch pedal to normal position and remove over-centre spring together with assembly clip -3317-.
  A30-0007
Installing
–  Pull clutch pedal into passenger compartment.
–  Insert over-centre spring into rear mounting -arrow B- first, then operate clutch pedal until the assembly clip -3317- seats against the mounting lug -arrow A- of the clutch pedal.
–  Return clutch pedal to normal position and remove assembly clip -3317-.
  A30-0009

Removing and installing over-centre spring - RHD vehicles > < Removing and installing clutch pedal switch F36 (round housing)