Installation is carried out in reverse sequence; note the following: |
–
| Pull out operating rod -arrow- all the way before installing clutch pedal switch. |
–
| Insert retainer tabs -1- and -2- of switch in recesses provided in mounting hole and secure by turning clockwise through 45°. |
l
| The clutch pedal should be in the normal position (i.e. not pressed down). |
l
| Do not press clutch pedal when installing. |
l
| Plunger is adjusted automatically when clutch pedal switch is installed. |
–
| Attach electrical connector to clutch pedal switch. |
|
|
|