audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Radiator and radiator fan - Assembly overview > < Removing and installing cooling system thermostat

A3 Mk1

4-cyl. Diesel Direct Injection Engine (TDI), Mech. Components
Removing and installing parts of the cooling system
Installing coolant pipe
 
A19-0029

Note:

Replace seals and gaskets.

  • ‒ Before installing. clean and smooth down sealing surface for O-ring.
  • ‒ → Moisten new O-ring -1- with G 012 A8 D and slide onto coolant pipe -2-.
  • ‒ Push coolant pipe into opening in cylinder block.
  • ‒ Top up coolant .

Tightening torque

Component

Nm

Coolant pipe to cylinder block

10

Radiator and radiator fan - Assembly overview > < Removing and installing cooling system thermostat