A3 Mk1
| Coolant distributor housing - exploded view of components |
| 1 - | O-ring |
| q | Renew |
| 2 - | Retaining clip |
| q | Check for firm attachment |
| 3 - | 10 Nm |
| 4 - | O-ring |
| q | Renew |
| 5 - | Coolant temperature sender -G62- |
| q | For engine control unit |
| q | With coolant temperature sender -G2- |
| q | Checking → Rep. Gr.01. |
| 6 - | Electrical connector |
| 7 - | Heating element connection |
| 8 - | 10 Nm |
| 9 - | Thermostat for map-controlled engine cooling system -F265- |
| q | With hose connection |
| q | With electrical heating element for controlled opening |
| q | Checking → Chapter |
| q | Starts to open at approx. 105 °C |
| q | Opening travel at least 7 mm |
| q | Checking (electrical test) → Chapter |
| q | Removing and installing → Chapter |
| 10 - | Seal |
| q | Renew |
| 11 - | Coolant distributor housing |
