audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Assignment of dash panel insert lamps - as of Model Year 1998 > < Removing and installing dash panel insert

A3 Mk1

Electrical system
Dash panel insert - up to Model Year 1999
Assignment of dash panel insert lamps - Model Year 1997

Note:

With three exceptions, all warning lamps are fitted with light-emitting diodes. Dash panel insert must be replaced in the event of failure of warning lamp with LED.
 
A90-0046

Midline dash panel insert

  •     1 -    → Main beam warning lamp
  •     2 -    Traction control system (TCS) warning lamp (only if TCS fitted)
  •     3 -    Trailer turn signal indicator lamp (only if trailer coupling fitted)
  •     A -    Blue 32-pin connector for basic functions
  •     B -    Green 32-pin connector for additional functions
  •     C -    Cover panel for vehicles with no ambient temperature display

Note:

Cover panel -C- is to be removed if dash panel insert is replaced on vehicles with ambient temperature display or if ambient temperature display is retrofitted.
 
A90-0047

Highline dash panel insert

  •     1 -    → Main beam warning lamp
  •     2 -    Traction control system (TCS) warning lamp (only if TCS fitted)
  •     3 -    Trailer turn signal indicator lamp (only if trailer coupling fitted)
  •     A -    Blue 32-pin connector for basic functions
  •     B -    Green 32-pin connector for additional functions
  •     C -    Red 20-pin connector for driver information system (DIS)

Assignment of dash panel insert lamps - as of Model Year 1998 > < Removing and installing dash panel insert