Audi Workshop Service and Repair Manuals

Removing

Notes:

• ◆ Dash panel insert is not to be dismantled.
• ◆ Removal of dash panel insert does not involve taking out steering wheel.
• ◆ All cable ties unfastened or cut open on removal are to be re-attached in same position on installation.

• ‒ Determine input values for dash panel insert replacement:

=> Electrical System Self-diagnosis; Repair Group 01; Self-diagnosis of dash panel insert up to Model Year 1999

• ‒ Pull out steering wheel with adjuster as far as it will go and tilt it downwards.
• ‒ → Pull off surround -1- in direction of arrow.

• ‒ → Screw out bolts -arrows-.
• ‒ Pull out dash panel insert to front.
• ‒ If fitted, cut open cable ties on back of dash panel insert.

• ‒ → Release catches of connectors -arrow- and unplug connectors.

Installing

Install in reverse order, paying attention to the following:

• ‒ After installation, check operation of dash panel insert.
• ‒ If operation is OK, enter input values for dash panel insert:

=> Electrical System Self-diagnosis; Repair Group 01; Self-diagnosis of dash panel insert up to Model Year 1999