audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Wheel pulse test > < Call-up of current parameters

A3 Mk1

Table of typical tyre circumferences
Table of typical tyre circumferences
   
Tyre type forTypical new tyre circumferences
(following wheel calibration)
A31900 - 1940

  Note!
If tyres are not new, typical circumferences may deviate from specified values.
Indicated on display:
   
  
TYRE TYPE
- - - - - - - - - - - - - -

205/60 15
- - - - - - - - - - - - - -
C: 1910 MM
> CONTINUE

–  Press ENTER key to continue.
Possible tyre sizes and circumferences ⇒ Tyre table → Chapter
In the event of a fault, i.e. displayed tyre type does not coincide with actual tyres:
–  Perform wheel calibration → Chapter.
For special tyre types select menu item “SPECIAL” → Chapter.
Indicated on display:
   
  
TEST DRIVE
- - - - - - - - - - - - - -
HAS BEEN
PERFORMED


> OK

–  If there are no faults, use ENTER key to confirm “OK” display.
In the event of a fault (display “MISSING”), i.e. test drive not performed:
–  Perform test drive → Chapter.
   

Wheel pulse test > < Call-up of current parameters