audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Exploded view - brake pedal (right-hand drive vehicles) > < Exploded view - brake pedal (left-hand drive vehicles)

A3 Mk2

Exploded view - brake pedal (left-hand drive vehicles with automatic gearbox)
Exploded view - brake pedal (left-hand drive vehicles with automatic gearbox)
  Note
The brake light switch is not fitted on all models
  WARNING
The brake pedal travel must not be restricted by additional floor coverings.
   
1 - Mounting bracket
2 - Hexagon nut, 25 Nm
3 - Brake pedal switch -F47-
  Note
The brake light switch is not fitted on all models
q   Before installing brake light switch, clip brake pedal to brake servo push rod → Chapter
q   Removing and installing, adjusting → Chapter
q   Lubricate plunger tip with polycarbamide grease -G 052 142 A2-.
4 - Hexagon bolt
5 - Brake pedal
q   Removing and installing → Chapter
q   Separating from brake servo → Chapter
q   Before installing, lubricate pivot points with polycarbamide grease -G 052 142 A2-.
6 - Cap
7 - Bearing shell
8 - Mounting
q   For ball head of brake servo push rod
9 - Hexagon nut, 25 Nm
10 - Bearing bush
q   Before installing, lubricate pivot points with polycarbamide grease -G 052 142 A2-.
11 - Pivot pin

   

Exploded view - brake pedal (right-hand drive vehicles) > < Exploded view - brake pedal (left-hand drive vehicles)