A3 Mk2
Note
|
1 - | Hexagon nut, 25 Nm |
2 - | Hexagon nut, 25 Nm |
3 - | Brake pedal switch -F47- |
Note
The brake light switch is not fitted on all models |
q | Before installing brake light switch, connect brake pedal to brake servo push rod → Chapter |
q | Removing and installing, adjusting → Chapter |
q | Lubricate plunger tip with polycarbamide grease -G 052 142 A2-. |
4 - | Brake pedal |
q | Removing and installing → Chapter |
q | Separating from brake servo → Chapter |
q | Before installing, lubricate pivot points with polycarbamide grease -G 052 142 A2-. |
5 - | Cap |
6 - | Mounting bracket |
7 - | Pivot pin |
8 - | Bearing bush |
q | Before installing, lubricate pivot points with polycarbamide grease -G 052 142 A2-. |
9 - | Hexagon bolt |