audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing gearbox mounting > < Securing gearbox to assembly stand

A3 Mk2

Exploded view - assembly mountings
   
Exploded view - assembly mountings
1 - Bolt
q   Renew
q   Tightening sequence → Fig.
q   50 Nm + 90°
2 - Pendulum support
q   Removing and installing → Chapter
3 - Engine mounting
q   Removing and installing → Rep. Gr.10
4 - Bolt
q   Tightening torque → Rep. Gr.10
5 - Connecting bracket
q   Removing and installing → Rep. Gr.10
6 - Bolt
q   Tightening torque → Rep. Gr.10
7 - Bolt
q   Tightening torque → Rep. Gr.10
8 - Bolt
q   Tightening torque → Rep. Gr.10
9 - Bolt
q   Tightening torque → Rep. Gr.10
10 - Bolt
q   Renew
q   Tightening sequence → Fig.
q   60 Nm + 90°
11 - Bolt
q   Tightening sequence → Fig.
q   Renew
q   40 Nm + 90°
12 - Gearbox mounting
q   Removing and installing → Chapter
q   Attaching to gearbox support
13 - Gearbox support
q   Removing and installing → Chapter
14 - Bolt
q   Renew
q   40 Nm + 90°
15 - Bolt
q   Renew
q   Tightening sequence → Fig.
q   100 Nm + 90°
16 - Bolt
q   Renew
q   Tightening sequence → Fig.
q   50 Nm + 90°

   
Attaching gearbox mounting to gearbox support
–  Renew bolts.
–  Tighten all bolts hand-tight.
–  Tighten bolts to specified torque.
  A10-1634
Installing pendulum support
–  Renew bolts.
–  First secure pendulum support to gearbox (-2- and -3-), then on subframe -1-.
  A10-1578

Removing and installing gearbox mounting > < Securing gearbox to assembly stand