audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing selector mechanism > < Removing and installing selector mechanism cover

A3 Mk2

Removing and installing printed circuit on cover
Removing and installing printed circuit on cover
Removing printed circuit from cover
–  Remove cover of the selector mechanism → Chapter.
   
–  Press down the locking hooks -arrows- and pull the cover -2- off the guide -1-.
–  Remove the printed circuit on the cover.
Installing printed circuit on cover
Installation is carried out in reverse sequence; note the following:
  Note!
Make sure the retaining lugs on the guide do not break off when attaching the cover.
–  Install the cover of the selector mechanism → Chapter.
  A37-0492

Removing and installing selector mechanism > < Removing and installing selector mechanism cover