Note t
| To install the selector lever handle the interlock button has to be pulled out to the stop and must be secured with either a cable tie -arrow- or with the assembly aid supplied together with the new handle. |
t
| If, by mistake, the interlock button has not been secured, it must not be pulled out of the selector lever handle by means of mechanical tools. Apply a compressed-air gun at the bottom of the handle and press the interlock button out with compressed air. |
–
| Place selector lever handle fully on selector lever - interlock button points towards the driver. |
l
| The handle must engage in the annular groove on the selector lever. |
–
| Remove the cable tie or assembly aid, allowing the interlock button mechanism to engage in the vertical groove on the selector lever. If necessary, press the interlock button into the selector lever handle. |
|
|
|