A3 Mk2
| Assembly mountings - exploded view |
| 1 - | Gearbox support |
| 2 - | Bolt |
| q | Gearbox support to gearbox |
| q | Tightening torque → Rep. Gr.34 |
| 3 - | Bolt |
| q | Gearbox support to gearbox |
| q | Tightening torque → Rep. Gr.34 |
| 4 - | Engine mounting |
| 5 - | Bolt |
| q | Engine mounting to body |
| q | Renew |
| q | 40 Nm + turn 90° further |
| 6 - | Bracket for activated charcoal filter |
| 7 - | Bolt |
| q | 9 Nm |
| 8 - | Nut |
| q | 9 Nm |
| 9 - | Bolt |
| q | Connecting bracket to body |
| q | Renew |
| q | 20 Nm + turn 90° further |
| 10 - | Bolt |
| q | Connecting bracket to engine mounting |
| q | Renew |
| q | 20 Nm + turn 90° further |
| 11 - | Connecting bracket |
| 12 - | Bolt |
| q | Engine mounting to body |
| q | Renew |
| q | 40 Nm + turn 90° further |
| 13 - | Bolt |
| q | Engine mounting to timing chain cover |
| q | Renew |
| q | 60 Nm + turn 90° further |
| 14 - | Pendulum support |
| 15 - | Bolt |
| q | Pendulum support to subframe |
| q | Renew |
| q | 100 Nm + turn 90° further |
| 16 - | Bolt |
| q | Pendulum support to gearbox |
| q | Renew |
| q | 40 Nm + turn 90° further |
| 17 - | Bolt |
| q | Pendulum support to gearbox |
| q | Renew |
| q | 40 Nm + turn 90° further |
| 18 - | Bolt |
| q | Gearbox mounting to gearbox support |
| q | Tightening torque → Rep. Gr.34 |
| 19 - | Bolt |
| q | Gearbox mounting to body |
| q | Tightening torque → Rep. Gr.34 |
| 20 - | Gearbox mounting |
| q | Illustration shows version for dual clutch gearbox |
