Audi Workshop Service and Repair Manuals > A3 Mk2 > Power unit | 4-cylinder direct petrol injection engine (1.4 ltr. 4-valve turbo), mechanics | Engine cooling | Coolant pipes | Removing and installing coolant pipes (front)

Removing and installing coolant pipes (front)

Special tools and workshop equipment required

t	Hose clip pliers -VAS 6362-

Removing

–	Drain coolant → Chapter.

–	Remove catalytic converter → Chapter.

Note

Place a cloth underneath to catch escaping engine oil.

–	Unscrew bolts -1- and -2- and remove oil return pipe for turbocharger.

–	Remove bolts -1- and -2- and detach coolant pipes (front) from engine oil cooler.

–	Detach coolant hoses -arrows-.

Installing

l	Tightening torques → Chapter

Installation is carried out in the reverse order; note the following:

–	Install oil return pipe for turbocharger → Chapter.

–	Install catalytic converter → Chapter.

–	Fill up with coolant → Anchor.

Audi Workshop Service and Repair Manuals